Floor and Stone Sealer - HFR-F

HFR-F Floor & Stone Sealer is water-based therefore soaks into the surface to give medium length protection against the growth of moss & algae, oil staining and the general ingress of dirt as well as assisting to prevent the loss of pointing sand between blocks.

HFR-F Floor & Stone Sealer is best applied, neat, by roller to a clean, dry surface. The weather should be dry, with no forecast of rain or frost, with a minimum air temperature of 10C. Just one good coat is normally required to seal surfaces however up to 3 coats may be applied for increased protection. 12 hours should be left between coats at 24-hours after the final coat.

Coverage approximately 10m2 per litre.

Lifespan of this products depends upon the type of surface, age, amount of use and how well it was cleaned and applied however as a general guide protection should be given for around 3-years.