Online Catalogue | Moss Killer & Prevention | Moss Prevention Roof & Wall Sealer - Hydrosil BS
Specifically designed for concrete or clay roof tiles, brick or concrete walls and all other mineral surfaces HydroSil will protect surfaces from water ingress, prevents the growth of moss and algae, reduces discolouration and prevents salt blooming on brickwork.
Based on the latest nano-technology HydroSil BS consists of ultra fine particles, measured in the millionth of a millimeter. Its special composition enables it to actively bind to mineral surfaces thus giving the long-term protection required. As HydroSil BS is water-based it is very easily absorbed into the surfaces and gives off no harmful, solvent vapors as with many other products.
|  |
|
 |
 |
HydroSil BS should be applied directly to a clean and dry surface. Apply with a brush, roller, garden sprayer or low pressure spray. One treatment is sufficient for most surfaces however, if required, a second treatment should be undertaken within an hour of the first. This will ensure that the second coat is fully absorbed together with the first. |
|
|
Technical DataColour: White (dries colourless)
Drying Time: Approximately 1-hour at 20C.
Coverage: 1 litre covers between 4 - 5 m2 depending upon pourosity of surface.
Application: Brush, roller, garden sprayer or low pressure spray-gun.
Dilution: The water-based product is supplied ready to use.
Cleaning: Clean tools in clean, soapy water immediately after use.
Package Size: 10 and 20-litres.
Storage: Dry, frost free and out of the reach of children.
|
|
|
|
|
|
